• 1300 663 888
Unimig Razor 220 DC Tig/MMA HF Digital Inverter

Unimig Razor 220 DC Tig/MMA HF Digital Inverter

High Frequency TIG

Maximise your results from start to finish. A high-frequency. torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.

Foot Control Ready

The perfect accessory, easily adjust your amperage to. suit every weld as you go without disrupting your torch movement.

Pulse TIG

Minimise the heat input without compromising on any of. the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding.

Optional Remote Control

Upgrade your machine with a handy remote control. Both a. wired and wireless controller are available.

SKU U12003K Categories , Brand:

Description

HD Backlit Control Panel

The high definition backlit screen presents your welding parameters in a clean, easy to follow layout. Clear numbers, simple icons and a structured interface make adjusting your settings fast, intuitive and effortless.

[tws_videos id=”1″]

10A Plug

Ready to run on any domestic outlet. Simple to power, easy to move and built for anyone who needs a portable welding setup.

[tws_videos id=”2″]

Foot Pedal Ready

Enjoy greater control and precision with our optional foot control accessory. This handy feature allows you to easily adjust your TIG amperage on the fly, without interrupting your torch movement. Wireless and wired options available.

[tws_videos id=”3″]

Power Factor Correction (PFC)

Get the most out of your machine. The PFC maximises the electrical efficiency of the machine and automatically compensates for any voltage fluctuations, so you get more output power and the internal components last longer.

SINE_OFF_UPDATED
SINE_ON_UPDATED

Advanced IGBT Inverter Technology

Our IGBT inverter platform delivers higher efficiency, stronger arc stability and more consistent power delivery. It runs cooler, responds faster to changes in arc demand and provides the reliability needed for modern welding applications.

[tws_videos id=”4″]

Active Airflow System

The active air passage channels airflow through the machine while keeping dust away from critical electrical components. This improves cooling efficiency, protects the internals and helps extend the life of your welder.

[tws_videos id=”5″]

Smart Fan Technology

The fan runs only when needed, reducing noise, cutting power use and limiting the dust drawn into the machine. This keeps internal components cleaner and helps extend the overall life of the unit.

[tws_videos id=”6″]

IP23S Protection Rating

Rated IP23S for reliable performance in demanding welding environments. Built to handle tougher conditions and maintain dependable operation where durability matters.

RAZOR_220_DC_IP_RATING

Advanced MMA Features

Advanced MMA features are designed for improving weld quality and ease of use.

[tws_videos id=”7,8,9″]

Additional Features

Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.

Technical Data
SKUU12003K
Primary Input Voltage240V Single Phase
Supply Plug10 AMP
Ieff (A)9.8
Rated Output5A/10.2V - 220A/18.8V
No Load Voltage (V)68v
Protection ClassIP23S
Insulation ClassH
Minimum Generator (kVA)9.0
Dinse Connectors35/50
StandardAS/NZ60974-1
TIG Weld Material typeMild Steel, Stainless Steel, Copper, Silicon Bronze, Titanium
MMA Weld Material typeMild Steel, Stainless Steel, Cast Iron
Warranty (Years)5
TIG Specifications
TIG Arc Ignition TypeHigh Frequency, Lift Arc
TIG Process TypeStandard DC, and Pulsed DC
DC TIG Welding Current Range5-220A
TIG Duty Cycle @ 40°C20% @ 220A, 60% @ 127A, 100% @ 98A
TIG Welding Thickness Range1-8mm
STICK Specifications
STICK Welding Current Range20-160A
STICK Duty Cycle @ 40°C20% @ 160A, 60% @ 92A, 100% @ 72A
STICK Electrode Range2.5-4.0mm
STICK Welding Thickness Range2-10mm
Size & Weight
Dimensions (mm)310×150×460 mm
Weight (kg)8.9kg

This next generation interface panel is bright and easy to read in any environment. Power Factor Correction (PFC) PFC gives you maximum electrical efficiency. It automatically compensates for any voltage fluctuation, and PFC is also designed to be generator friendly.

The RAZOR TIG 220 DC features adjustable Arc Force and Hot Start functionality. These features are designed for improving weld quality and ease of use.

A 10 AMP power plug can be used on any domestic outlet. It’s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere.

Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.

Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.

The perfect accessory, easily adjust your amperage to suit every weld as you go without disrupting your torch movement.

Minimise the heat input without compromising on any of the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding.

Upgrade your machine with a handy remote control. Both a wired and wireless controller are available.